Looking for help?

Find answers to your questions

The rudder triggers center physically, but don't show as centered in the sim

Because the rudder triggers are mechanically linked there is natural variation that is part of every Arrow. Our firmware calibration is unique to your Arrow at full left and right deflection of each trigger and the neutral setting. If for any reason calibration is needed again, you can perform it yourself.

Have a joystick monitor open to get visual feedback on calibration status, as instructed in the question “How do I verify if my controller is actually working properly?”

Step 1:

Fully depress and hold the left trigger, then press six pack buttons 1,2 and 3 (top row) and the left button on the bottom row (4). You will see hat control flash left to confirm it has captured the left-most position.

Step 2:

Fully depress and hold the right trigger, then press six pack buttons 1, 2 and 3 (top row) and the right button on the bottom row (6). You will see hat control flash right to confirm it has captured the right-most position.

Step 3:

Release both triggers and let them return to center. Then press six pack buttons 1, 2 and 3 (top row) and six pack button 5 (center bottom row). You will see all buttons flash indicating calibration has been saved.

Step 4: After that, unplug and replug the controller.

Step 5: If needed, run through the standard Windows joystick calibration.

Step 6: Launch your preferred simulator and go fly!

Updated on 29 Feb 2024